Lifco Hydraulics Mobile Logo


PVP48 Series

     The PVP variable volume pumps are reliable, medium pressure (3600 psi) rated, axial piston pumps. Cast iron housing and thrudrive available on all 5 sizes: 16cc, 23cc, 33cc, 41cc, and 48cc. Controls are modular and interchangeable: pressure compensated, remote, load sensing, and torque limiting. Both SAE and Metric, side ported and rear ported, flange and threaded ports. Search Lifco Hydraulics PVP stock below:



Click to Filter by Specs +


Unit#(Click item for more)DescriptionStockPrice(USD)
PVP48363R11 2 In StockPlease Contact Us
PVP4836R211PARKER PISTON PUMP1 In Stock$2358.30
PVP48362R2M11 1 In StockPlease Contact Us
PVP4830L2VM11NEW PUMP1 In StockPlease Contact Us
PVP48203r6a111pump1 In StockPlease Contact Us
PVP4836R11 1 In StockPlease Contact Us
PVP48363R2M11 1 In StockPlease Contact Us
PVP4836D2R6B4A21 Out Of StockPlease Contact Us
PVP4836CR11 Out Of StockPlease Contact Us
PVP4836C2RM11PVP4836C2RM11Out Of StockPlease Contact Us
PVP4836D2RA Out Of StockPlease Contact Us
PVP4836L2H11 Out Of StockPlease Contact Us


Part#(Click item for more)DescriptionStockPrice(USD)
787749MAX VOL STOP PVP41 PVP483 In Stock$117.00
PVP4830B2R11NEW PUMP1 In StockPlease Contact Us


Displacement: (CC/REV)16.423334148
Max Pressure:248 bar (3600 PSI)248 bar (3600 PSI)248 bar (3600 PSI)248 bar (3600 PSI)248 bar (3600 PSI)
Peak Pressure:310 bar (4500 PSI)310 bar (4500 PSI)310 bar (4500 PSI)310 bar (4500 PSI)310 bar (4500 PSI)
Max RPM:30003000300028002400
Min RPM:600600600600600
Mount:SAE-A or Metric 2-boltSAE-B or Metric 2-boltSAE-B or Metric 2-boltSAE-B or Metric 2-boltSAE-B or Metric 2-bolt
Thru Shaft Capable?YesYesYesYesYes
Unit Weight:33 lbs47 lbs47 lbs60 lbs60 lbs
Need Assistance?


Price(USD):Please Contact Us
Stock:2 In Stock

Common Units:

  • PVP1636R212
  • PVP2330BL221
  • PVP3336R221
  • PVP3320CR2M21
  • PVP2320BR221

3-D Drawings:

 PVP 3D Drawing
PVP 23/33 - Rear Ported
View PDF
PVP 3D Drawing
PVP 23/33 - Side Ported
View PDF


       When a local fabrication shop requested a reliable, quiet pump to supply hydraulic power for a scrap bailing mechanism; Parker’s PVP variable volume pump fit the bill perfectly. They were looking for adjustability in both pressure and flow limits; as well as energy efficiency. The machine required fast movement to close an air gap; as well as remote force adjustability at the operator’s station. This was accomplished by using a torque limiting control with remote pressure cut off capability. In this way, high flow was delivered to the actuators when low resistance was present and low flow was produced when compression force was required – allowing for one small horsepower electric motor to meet both needs. This customer also demanded that the pump be readily available and easy to repair with parts inventory supported in North America. When it was demonstrated that the replaceable port plates and replaceable piston slipper plates make these pumps easy and economical to repair, the complete requirement was met and he was sold.

Note: A 10 horsepower electric motor was used to provide a cylinder travel speed with 15 GPM up to 1,000 PSI and a compression force was adjustable up to 3,600 PSI. Without the torque limiting control, this would have needed more than 30 horsepower.