Home > Product Line > Dmic

Lifco Hydraulics Product Line
dmic logo Below are the Product Categories for the Manufacturer along with the Part, Model, and/or Series Number.
Please note that the documents to follow are in pdf icon PDF format and will require Adobe Acrobat Reader
Dmic :: 13 Categories Found ::
Ball Valves
Ball valves are quarter-turn, straight through flow valves that have a round closure element with matching rounded seats that permit uniform sealing stress. Ball valves are used in situations where tight shut-off is required. The type of seat can vary w

3-Way Low Pressure Diverter
Trunnion Type Multi Way
Medium Pressure
Brass No-Frills Low Pressure
A type of ball valve. Provides top quality and reliability into the domain of ordinary brass hydraulic valves.

Direct Mount High Pressure

Theaded Port High Pressure
Super High Pressure
Manifold Mounted 2-Way & 3-Way
A connection point for mounting quick connect fittings on fixtures and pallets. Secure interface for connecting between rigid steel tubing and flexible hose for substances that need continuous flow (to prevent sedimentation, condensation, fermentation).

Fixed Flange High Pressure
Check Valves
Self-activating safety valves that permit gases and liquids to flow in only one direction, preventing process flow from reversing. Classified as one-way directional valves. Fluid flowing one way will open the valve, while backflow forces the valve closed.

Cutsheets
Self-activating safety valves that permit gases and liquids to flow in only one direction, preventing process flow from reversing. Classified as one-way directional valves. Fluid flowing one way will open the valve, while backflow forces the valve closed.

Flow Controls
Dual taper needle provides fine metering at low flows and rapid response at higher flows.