P1/PD100 Pumps

     Highly customizable hydraulic pump for medium pressure (280 bar) applications. Low noise, and wide variety of controls types. Electronic controls and displacement feedbacks available. Lifco stocks the SAE units and the common service parts. Search Lifco Hydraulics P1-PD stock below:

Search Lifco Hydraulics Inventory:



Select Product Type: Units   Parts
Unit#(Click item for more)DescriptionStockPrice(USD)
PD100PS01SRS5AAFOTMPARKER PD100 PUMP2 In StockPlease Contact Us
P1100PS01SRU5AL00S1000000PI UNIT2 In Stock$2852.50
P1100PS01SLU5AC00T00N000002E-87021-5Out Of Stock$2895.20
P1100PS01SRM5AL00S1000000PUMP PARKEROut Of Stock$2774.10
P1100PS01SRU5AAN0S1000000 Out Of StockPlease Contact Us
P1100PS06SRM5BL00S1000000PISTON PUMP B MODOn Order Delivery Date 12/8/2017Please Contact Us


P1/PD 100
Displacement: (CC/REV) 100
Outlet Pressure - Continuous:280 bar (4000 PSI)
Outlet Pressure - Intermittent: 320 bar (4500 PSI)
Outlet Pressure - Peak: 350 bar (5000 PSI)
P1 Max Speed: (1.3 bar abs inlet) - RPM 2500
P1 (1.0 bar abs inlet) - RPM 2100
P1 (0.8 bar abs inlet) - RPM: 1900
PD Max Speed (1.0 bar abs inlet) - RPM 1800
PD (0.8 bar abs inlet) - RPM 1800
Minimum Speed - RPM: 600
Inlet Pressure - Max: 10 bar (145 PSI)
Fluid Temperature Range: -40 to +95°C, -40 to +203°F
Fluid Viscosity – Rated, cSt: 6 to 160
Max. Intermittent - cSt (for Cold Starting): 5000
Min. Intermittent - cSt: 5
Fluid Contamination - Rated, ISO: 20/18/14
Fluid Contamination - Maximum, ISO: 21/19/16
Weight: Non Thru-Drive 53 kg (117 lb)
Weight: Thru-Drive 55 kg (121 lb)
Need Assistance?   sales@lifcohydraulics.com


Buy Direct Link:Buy Direct
Price(USD):Please Contact Us
Stock:2 In Stock

Application: PD45 Axial Piston Pump

     A 'very quiet' pressure compensated pump was required for use on a piece of laboratory equipment. The target sound level was below 83 dB(A) and the flow had to be 20 GPM at 4,000 PSI. This is 50 horsepower! Parker’s PD45 (2.7 cubic inch / revolution) axial piston pump held the solution. Not only does it have a cast iron housing; but, it incorporates their “Ripple Chamber” technology engineered into the side ported pump. The ripple chamber reduces pressure pulsations (called ripple) at the outlet of the pump by 40-60%. This leads to a significant reduction in overall system noise, without the added expense of noise dampening components. The pump was powered by a 1,800 RPM electric motor. At this speed the pump produces a sound level of 76 dB(A). Through the use of this pump and correct power unit construction, the customer’s expectations were met.